3PHASE 4WIRE ENERGY METER
——General Information——
Product Features:
1. DIN rail, small size and easy installation
2. When any two of phase A B C are powered off, the energy meter can still work normally
3. Has the function of selling electricity remotely
4. Communication method: RS485, infrared
5. Has the function of multiply tariff(variable rate)
6. Can display total power consumption, current, voltage, power, power factor, etc.
7. The warning light may illuminate when pressure has dropped
——Product Function——
1.Display with LCD display with wide viewing angle and high contrast
2.Communication method: RS485, infrared
3.Applicable place:community,hotel,shopping mall ,office building,school,property,etc
4.Measurement functions:multiply tariff ,sell electricity remotely
5.High precision measurement:positive/negative,active/reactive energy
6.Easy installation:Adopt guide rail installation,convenient installation,light volume
7.Component:high-quality components
8.Has the function of multiply tariff
9.The power-off switch can be built-in or external
——Technical Parameters——
Reference voltage | 3×220V/380V |
Current specification | 3×1.5(6)、3×5(60)、3×10(40)、3×20(80)A 、3×10(100)A |
Rated frequency | 50Hz |
Accuracy level | Active level 1 |
Power consumption | Voltage line: <=1.5W, 10VA; current line: <2VA |
Temperature range | Working temperature range -25~55degree,extreme working temperature range -40~70 degree |
Meter Constant(imp/kWh) | 6400、400 |
Humidity range | 40%~60%, working relative humidity be controlled within 95% |
——Product pictures——
——Wire Connection Modes——
Fix the electric meter to the guide rail, and connect the interface according to the wiring diagram. It is recommended to use copper wire or copper terminal. The screws in the terminal box should be tightened to avoid burning due to poor contact or excessively thin wire.