Single Phase DIN Rail Energy Meter(dormitory)

Single-phase din rail electric energy meter (dormitory) is a new electric energy measurement product developed and produced by our company according to technical specifications of GB/T17215.321-2008.This product uses large-scale integrated circuits and SMT production processes, with functions such as electrical energy measurement, data processing, real-time monitoring, and information interaction.

Product Detail

Product Tags

——General Information——


Product Features:

1. DIN rail, small size and easy installation

2. Display cumulative power consumption, easy and fast to read

3. The electric energy meter has the function of selling electricity remotely

4. Communication method: RS485, infrared

5. The energy meter has the function of multiply tariff(variable rate)

6. Active &Reactive energy measurement functions

7.Meter will be turned off when the set maximum threshold value is exceeded.With calendar and clock, you can program 8 periods to control the closing and closing within 24h 


——Product Function——


1.Display with LCD display with wide viewing angle and high contrast

2.Communication method: RS485, infrared

3.Applicable place:community,hotel,shopping mall ,office building,school,property,etc

4.Measurement functions:voltage, current, power, power factor and others

5.High precision measurement:positive/negative,active/reactive energy

6.Easy installation:Adopt guide rail installation,convenient installation,light volume

7.Component:high-quality components



——Technical Parameters——


Reference voltage 220V
Current specification 520A ,
Rated frequency 50Hz
Accuracy level Active level 1
Power consumption Voltage line: <=1.5W, 10VA; current line: <=2VA
Temperature range Working temperature range -25~55degree,extreme working temperature range -40~70 degree
Meter Constant(imp/kWh) 1600
Humidity range 40%60%, working relative humidity be controlled within 95%


——Product pictures——


1  2  4  3


——Wire Connection Modes——


Fix the electric meter to the guide rail, and connect the interface according to the wiring diagram. It is recommended to use copper wire or copper terminal. The screws in the terminal box should be tightened to avoid burning due to poor contact or excessively thin wire.

  • Previous:
  • Next:

  • Write your message here and send it to us